Labino GX Orion
Labino’s LED overhead inspection lamp, GX Orion, is a overhead modular UV LED system that can be used to cover large areas for NDT Inspection purposes such as for fluorescent MT, PT, MPI and crack & leak detection.
There are three different models to choose from, remote controlled with multiple UV intensities, UV on/off button only, and UV and Visible (white) light on/off buttons only.
The GX Series family of products has been specifically designed to meet the ASTM E3022-18 and ISO 3059-12 standards as well requirements set by the PRIMES. The optics used in the GX Series meet the Rolls-Royce RRES 90061 specification.
The beam profile of the UV light is extremely homogeneous without any footprints showing from the LEDs, shades, dark spots or other disturbing defects.
All GX Orion models have a built-in PLC interface designed to connect to your PLC system.
You can choose a “mother” or a “extension” GX Orion unit, with or without remote panel, with or without on/off power switches and still be able to monitor the unit completely through your computer via the PLC interface.
Less than 1 lux visible light created by the UV LED’s
Model Variants
GX Orion – REMOTE
Part No: L3100 (mother)
Labino GX Orion REMOTE has been tested to comply with both ASTM E3022-15 and ISO 3059-12 standards. It generates an intensity that can adjusted to vary from approximately 1,500 to 7,000 µw/cm² at 38cm (15 inches). It has a powerful white light that can generate 1,000 lux (93fc) at 30 cm (12 inches). A remote control allows you to switch on/off the UV and White light, change the intensity and set up the timer from up to 5 meters (16 feet) away.
Beam Profile > 1,200 µw/cm² = 330 mm x 230 mm.
Complies With: ASTM E3022-2018 and ISO 3059-12.
GX Orion - UV & WH
Part No: L3101 (mother) & L3104 (extension)
Labino GX Orion UV & WH has been tested to comply with both ASTM E3022-15 and ISO 3059-12 standards. It generates an intensity of approximately 7,000 µw/cm² at 38cm (15 inches). It has a powerful white light that can generate 1,000 lux (93fc). This model does not have a remote, it comes with one UV and one White light ON/OFF button.
Beam Profile > 1,200 µw/cm² = 330 mm x 230 mm.
Complies With: ASTM E3022-2018, Pratt & Whitney and ISO 3059-12.
GX Orion – UV
Part No: L3102 (mother) & L3105 (extension)
Labino GX Orion UV has been tested to comply with both ASTM E3022-15 and ISO 3059-12 standards as well as with the internal requirements of all PRIMES, including Rolls-Royce RRES 90061 and Airbus AITM6-1001. It generates an intensity of approximately 4,500 µw/cm² at 38cm (15 inches). This model does not have a white light or remote, it comes with one UV ON/OFF Button.
Beam Profile > 1,200 µw/cm² = 330 mm x 230 mm.
Complies With: ASTM E3022-2018, Rolls-Royce RRES 90061, Airbus AITM6-1001, ISO 3059-12, Pratt & Whitney, The Boeing Co and USAF.
Multiple Labino GX Orion “extension” units can be mounted on a “mother” unit on either the long side or short side.
This modular overhead UV System allows you to design the desired covered area by mounting together multiple units.
GX Orion “Mother” Package Includes:
GX Orion lamp of your choice, 4 stainless steel bars for mounting, 4 chains with snap links, Power Supply Unit, Cable between PSU
GX Orion “Extension” Package Includes:
GX Orion lamp with UV & WH or only UV LEDs, 2 stainless steel bars and 1 cable connection for assembly short side to short side, 2 stainless steel brackets and 1 cable connection for assembly long side to long side, 4 chains with snap links.